RU EN
en
+7 (35191) 6-21-44 Пн-Пт 08:00 - 17:00 Shosse Vostochnoe street, 2a, pom. 2/13
The leader
in the production VFS
Certificate
ISO 9001:2008
Number 1
In a region
Ask a Question

Facade profiles

Facade profiles

Ventilated facade systems are gaining more and more weight in the market of exterior finishing materials. Profile elements of various types are used as frames and form a so-called subsystem.

The facade profile is an integral part of the facade system. It is made of galvanized steel with a thickness of 1.2 mm to 1.5 mm. The Metalworking equipment used by the Alternative company makes it possible to produce facade elements of substructure according to strictly defined dimensions.

When installing the Alt-Facade facade systems, it is customary to use L – shaped, U – shaped, C - shaped and T – shaped profiles.

PROFILE FOR FACADE SYSTEMS

The profile for T – and C – shaped facade systems is the basis of a vertical guide structure.

These facade profiles used in ventilated facade systems allow the use of metal cassettes, profiled sheets, composite aluminum cassettes, stoneware, fiber cement boards, asbestos cement boards as a facing material.

The T – shaped profile used in Alt-Facade systems is made of thin-sheet steel with the use of cold-rolled zinc and additional polymer coating.

This profile is mounted with a lightweight vertical scheme, using corrosion-resistant self-tapping screws or exhaust rivets directly to the bracket.

The u – shaped profile when using a vertical-horizontal system creates the basis of a vertical guide in the design of a curtain facade.

When using the mounting scheme in the interstory ceiling, this profile is mounted using self-tapping screws or exhaust rivets to the horizontal guide GO-2R, which in turn is attached to the extension bracket. With this method, to compensate for the unevenness of the enclosing structures, it is possible to vary the length of the extension cord and move it along the console of the bracket.

When installed in increments of the width of the facing plate, it allows you to place a vertical seam between the panels in the center of the vertical profile.

Alternative LLC produces profiles and all fasteners for facade systems made of stainless and galvanized steel of certified brands. In the manufacture of profiles, high-quality steel is used that meets all permitted building codes and standards.

You can either order the design of the entire facade system, or buy a facade profile, the price of which is one of the most competitive on the market.

it is quite affordable and meets all modern building codes and standards.

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm