RU EN
en
+7 (35191) 6-21-44 Пн-Пт 08:00 - 17:00 2a Vostochnoe Highway st. 2/13 Prem.
The leader
in the production VFS
Certificate
ISO 9001:2008
Number 1
In a region
Ask a Question

ТРУДОУСТРОЙСТВО

Facade brackets

Facade brackets

Facade bracket is a fastening element of the ventilated facade system that provides a strong fastening of the bracing, where the cladding material is placed, relatively to the supporting base.

The facade system brackets provide the necessary air space between the building wall and the cladding material. This gap allows to use an insulation of the required thickness.

Selection of a bracket is based on its main characteristics: the possibility of adjusting the length and bearing capacity. based on the project, During the installation of the facade, it is important to perform a sketching on the load-bearing base of the building. It defies then type of the facade brackets to be installed.

To ensure the durability and reliability of the mounted facade system, the reinforced fastening bracket is attached to the wall using special anchor bolts. Anchors are manufactured according to two technologies: hot-dip galvanizing or thermal diffusion galvanizing; and are used depending on purpose. The bolts are attached to the supporting structure with special paronite gaskets that exclude the initiation of a thermal bridging.

Brackets for facade systems

For the convenience of facade installation, an extension bracket can be used. The fastener can also be made with grooves, which make it possible to adjust the racks in several planes. Due to the wide variety of types, sizes, and options to fasten the bracket KRU, different structures can be installed.

Nowadays brackets for facade systems are frequently chosen as fasteners. If a heavy material (like natural stone). Is used for cladding, it is necessary to fix it with a reinforced fastening bracket.

The reinforced fastening bracket for ventilated facade systems can be of different lengths depending on the wall material. The required length is determined according to the insulation thickness and the ventilated space (of 40 mm).

The bracket KRU with a console from 90 to 350 mm allows the facade to be leveled by the length of the bracing up to 350 mm. Facade bracket meets all modern building codes and standards; and is sold at good prices.

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm

AISI 430/1 mm
AISI 430/1.2 mm
AISI 304/1.2 mm